This line offers a wide range of choices
for contact adhesive applications. Select from bonding ranges,
strengths, solids content, and solvent or water-based formulations to
meet requirements for bonding laminate, foam and more. In
the line, you'll find the water-based pioneer 3M Fastbond Contact
Adhesive 30 NF - proven for almost 40 years in cabinet shops and still
in compliance with current and currently proposed air quality
regulations. Plus there's the latest innovation - 3M Fastbond Contact
Adhesive 29990NF with handling speed exceeding most solvent-based
systems and up to 350 psi in overlap shear.
The Fastbond
Water-Based Story
While competition pressures you to
improve productivity, regulatory legislation demands that you move
toward more environmentally responsible technologies. Some local
and regional regulations have made traditional solvent-based
contact adhesive virtually obsolete.
Fastbond is the 3M trademark on a
continually growing line of water-based adhesives that are helping
many industries meet the challenge right now and aim for the
foreseeable future. By replacing solvent-based adhesives,
complaince is getting easier in more and more applications.
|
|
Buy only the quantity you
need - Depending on the specific 3M Fastbond Adhesive, you can
select quart or gallon jugs for convenient handling, or 5-gallon pails
and 55-gallon drums for large bulk dispensing.
|
Tabletop lamination - With 3M
Fastbond Contact Adhesive 2000-NF, you get three times the coverage of a
typical solvent-based system. For production speed, you go from spray to
trim in seconds.
|
Foam fabrication - In compound
cushion assembly, high tack 3M Fastbond Foam Adhesive 100 holds curves
in seconds. Lighter density foam is adhered around the higher density
core with a smooth rounded edge. |