|
YOUR COMPLETE
SOURCE OF
ADHESIVES &
TAPES
|
|
POLYETHYLENE FILM TAPES
| Product Number / Specifications
LDPE-5A
Low density polyethylene film tape. 5.5 mil. Acrylic adhesive. Highly conformable.
Optically clear film. Good abrasion and chemical resistance. Outstanding moisture barrier properties. Acrylic based pressure sensitive adhesive system provides high adhesion and cohesion which yields a permanent bond with virtu- ally no edge bleed out. UVA resistant. Excellent long term aging stability without yellowing. 3" plastic core.
Applications
Water filter purification pipe wrap, protective sealing, splicing, seaming and patching where a highly conformable and optically clear material is required.
Physical
Properties
| Total thickness |
5.5 mil (0.14mm) |
|
Adhesive |
Acrylic |
|
Tensile strength |
12 lbs/in. width |
|
Elongation (at break) |
550% |
|
Adhesion (to steel) |
40 oz/in. |
|
Moisture vapor transmission |
Less than 2.0 grams/100 sq.
in./24 hrs. |
|
Operating temperature |
-400F to +
1900F |
|
LDPE-5A
36 YD (33MM) 108' Optically Clear |
| |
CASES |
| Width |
RLS/CS |
1-5 |
6-11 |
12+ |
| 1/4" |
(6.3mm) |
192 |
|
| 3/8" |
(9.5mm) |
128 |
|
| 1/2" |
(12.5mm) |
96 |
|
| 3/4" |
(19mm) |
64 |
|
| 1" |
(25mm) |
48 |
|
| 1 1/2" |
(38mm) |
32 |
|
| 2" |
(50mm) |
24 |
|
| 3" |
(75mm) |
16 |
|
| 4" |
(100mm) |
12 |
|
| 6" |
(150mm) |
8 |
|
| 54" |
(1371mm) |
LOG |
Clear |
Alternative to 3M #480; Patco 502A
Colors available by special order
|
| Product Number / Specifications
LDPE-5R
Low density polyethylene film tape. 5.0 mil. Synthetic rubber based adhesive. Its tough polyethylene backing offers good abra- sion and tear resistance. Low tack adhesive for surface protection applications. Clean removal.
Applications
Ideal for surface protection; polyethylene splicing; patching/repairing poly sheeting in boating and RV industry; electroplate
masking; color coding; wire identification; packaging; etc.
Physical
Properties
| Total thickness |
4.8 mil (0.120mm) |
|
Adhesive |
Solvent Based Rubber |
|
Tensile strength |
11.3 lbs/in. |
|
Elongation (at break) |
300% |
|
Adhesion to steel |
12.3 oz/in. |
|
Adhesion to backing |
6 oz/in. |
|
Static Shear at 230C
(3Kg. Weight) |
>40 hours to SST |
|
LDPE-5R
60 YD (55MM) 180' |
| |
CASES |
| Width |
RLS/CS |
1-5 |
6-11 |
12+ |
| 1/4" |
(6.3mm) |
144 |
|
| 1/2" |
(12.5mm) |
96 |
|
| 3/4" |
(1 9mm) |
64 |
|
| 1" |
(25mm) |
48 |
|
| 1 1/2" |
(38mm) |
32 |
|
| 2" |
(50mm) |
24 |
|
| 3" |
(75mm) |
16 |
|
| 4" |
(1 00mm) |
12 |
|
| 6" |
(1 50mm) |
8 |
|
| 41" |
(1040mm) |
LOG |
|
Alternative to 3M #483, Patco 502R.
Note: Other roll widths and/or lengths available upon request.
7 Colors available: Clear, white, yellow, black, blue, green and red.
|
|
| Product Number / Specifications
LDPE-9R
Low density polyethylene film tape. 9.0 mil. Synthetic Rubber Based Adhesive remains permanently tacky and bonds well to most surfaces over a wide range of temperatures; excellent low temperature bond. Tough polyethylene backing offers good
abrasion and tear resistance. Highly conformable, waterproof and resistant to chemical deterioration. 3" core.
Applications
Ideal for polyethylene spicing; patching/repairing poly sheeting used in boating and RV industry; surface protection & electroplate masking; wire identification; packaging; etc. Works well in most applications where a low thread count polyethylene coated cloth tape is being used.
Physical properties
| Total thickness |
9.0 mil (0.229mm) |
|
Adhesive |
Synthetic Rubber Based |
|
Tensile strength |
22 lbs/in. |
|
Elongation (at break) |
100% |
|
Adhesion (to steel) |
60 oz/in. |
|
Adhesion to backing |
35 oz/in. |
|
Moisture vapor transmission |
0.4 grams/100 sq. in./24 hrs. |
|
LDPE-9R
36 YD (33MM) 108' |
| |
CASES |
| Width |
RLS/CS |
1-5 |
6-11 |
12+ |
| 1/2" |
(12.5mm) |
96 |
|
| 3/4" |
(1 9mm) |
64 |
|
| 1" |
(25mm) |
48 |
|
| 1 1/2" |
(38mm) |
32 |
|
| 2" |
(50mm) |
24 |
|
| 3" |
(75mm) |
16 |
|
| 4" |
(1 00mm) |
12 |
|
| 6" |
(1 50mm) |
8 |
|
| 44" |
(1118mm) |
LOG |
|
Alternative to 3M #481, Tyco #827; Scapa #136; PATCO #W4300.
Colors available: Clear, white, red, black and blue.
|
 |
 |
|
HOME | About Us |
Products |
Contact Us | Ask The Expert
Copyright 2001, Adhesives and
Tapes |
