YOUR COMPLETE
SOURCE OF
ADHESIVES &
TAPES
|
REFLECTIVE TAPES
Heavy-duty SPVC Pipe Wrap/Surface Protection Tapes are highly resistant to sun, water, oil, acids, alkalies and corrosive chemicals. Bacteria and fungus resistant. Abrasion resistant. Provides electrical protection. Protects pipe joints, conduit couplings for overhead or direct buried applications. Application temperature:
Oo+. Water absorption rate (maximum): 0.290 (25oC9 24 hours).
Product Number / Specifications
REF-7
Engineering Grade Reflective Tape
7 year durability. 5.5 mil (0.14mm). Enclosed Lens Retroreflective Urethane Film coated with a permanent Acrylic Adhesive. 94# release liner. Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type 11), and ASTM D4956-94 (Type 1). Primarily designed for permanent & temporary traffic signage. Application surface should be flat (not recommended for unpainted stainless steel surface). Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut
(300oF to
325oF for 1-2 seconds).
SOLID COLORS:
Silver (white), yellow, red, orange, green & blue.
Physical
properties
Adhesion
|
900 Peel
|
1800Peel |
Substrate
|
15 mins.
|
24 hrs.
|
15 mins.
|
24 hrs.
|
Anodized aluminum
|
34
oz/in.
|
50
oz/in. |
Tore |
To re |
OEM Automotive Paint
|
50 oz/in. |
62 oz/in. |
Tore |
Tore |
Application
Temperature |
+50oF(10oC) |
Service Temperature Range |
-40oF to
+180oF (-40oC to 82oC) |
Dimensional Stability |
Less than 0.02 in. (0.8mm) shrinkage (1000 hours Atlas Twin Arch Weatherometer, EH). |
|
REF-7
10 YD (30 FT) |
Width |
RLS/CS |
ROLL |
CASE |
1/2" |
(12.7mm) |
144 |
|
3/4" |
(1 9mm) |
96 |
|
1" |
(25mm) |
72 |
|
1-1/2" |
(38mm) |
48 |
|
2" |
(50mm) |
36 |
|
3" |
(75mm) |
24 |
|
4" |
(100mm) |
12 |
|
6" |
(150mm) |
8 |
|
48" |
(1230mm) |
LOG |
|
REF-7
50 YD (150 FT) |
Width |
RLS/CS |
ROLL |
CASE |
1/2" |
(12.7mm) |
72 |
|
3/4" |
(1 9mm) |
48 |
|
1" |
(25mm) |
36 |
|
1-1/2" |
(38mm) |
24 |
|
2" |
(50mm) |
18 |
|
3" |
(75mm) |
12 |
|
4" |
(100mm) |
8 |
|
6" |
(150mm) |
6 |
|
48" |
(1230mm) |
LOG |
|
|
|
Product Number / Specifications
REF-S
Engineering Grade Reflective Tape
31/a" wide diagonal stripes. 6.8 mil (0.175mm). Polyester/vinyl with acrylic adhesive, 80# poly-coated Kraft release liner. Meets Federal specification No. LS-300C (Reflectivity 1, class 1), and FP- 85 (Type 11). Red/white not recommended for long term outdoor use due to fading.
COLORS:
Black/yellow or red/white diagonal stripes.
Specifications
180o
Peel adhesion: |
70 oz/in. - PSTC 1. |
Tensile strength: |
10 lbs/in. width |
Application temperature: |
Above 32'F |
Service Temperature: |
|
Cold resistance (72 hrs @ -70oF): |
No effect. |
Heat resistance (72 hrs @ 160oF): |
Max 0.012" shrinkage from edge. |
|
REF-S
50 YD (150 FT) |
Width |
RLS/CS |
ROLL |
CASE |
1" |
(25mm) |
36 |
|
2" |
(50mm) |
18 |
|
3" |
(75mm) |
12 |
|
4" |
(100mm) |
8 |
|
30" |
(762mm) |
LOG |
|
|
|
Product Number / Specifications
REF-OL
Overlaminated with tedlar 7" Wide Vertical Stripes. Designed for conspicuity treatment of trailers.
Same specs as REF-S, except OVERLAMINATED to protect tape and ink during vehicle washes. Tedlar provides
excellent protection from UV rays and abrasion. Note: Does NOT meet D.O.T. 49 CFT, part 571. Designed for use on vehicles under 80" wide or having a GVWR of less than 10,000 lbs., or for additional conspicuity on any size vehicle. Meets Federal Specification No. LS-300C (Reflectivity 1, Class 1)
COLORS: Red/white vertical stripes.
|
REF-S
10 YD (30 FT) |
Width |
RLS/CS |
ROLL |
CASE |
1" |
(25mm) |
72 |
|
2" |
(50mm) |
36 |
|
3" |
(75mm) |
24 |
|
4" |
(100mm) |
18 |
|
30" |
(762mm) |
LOG |
|
REF-OL
50 YD (150 FT) |
Width |
RLS/CS |
ROLL |
CASE |
1" |
(25mm) |
36 |
|
2" |
(50mm) |
18 |
|
3" |
(75mm) |
12 |
|
4" |
(100mm) |
8 |
|
30" |
(762mm) |
LOG |
|
|
|
|
|
HOME | About Us |
Products |
Contact Us | Ask The Expert
Copyright 2001, Adhesives and
Tapes |