YOUR COMPLETE
SOURCE OF
ADHESIVES &
TAPES
|
3M SCOTCH-WELDTM
STRUCTURAL ADHESIVES
Load-Bearing Formulations
For Metals, Rubber, Glass and More
As
an alternative to mechanical or fusion fastening, the reasons for
Scotch-Weld Adhesives are many:
- Greater design latitude
- Cleaner lines
- Material substitution
- Less machining
- Lighter weight
- More durability
- Less Cost
To meet application and end-use
requirements you can select from one-part heat-curing epoxies and
two-part room temperature-curing epoxies, acrylics and urethanes. There
are formulations for bonding steel, aluminum, copper, low surface energy
plastics, rubber, glass, wood, masonry and more.
Whatever properties you need - durable
adhesion, flexibility, creep resistance, heat and environmental
resistance, void-filling - you'll likely find a Scotch-Weld product to
meet your requirements and expectations. |
|
|
|
3M
has long been recognized as a pioneer in structural strength adhesives.
But to meet end use performance requirements doesn't just mean providing
the right chemical formula. Which is why 3M also develops dispensing
systems to facilitate production in low and high volume assembly. Many
two-part 3M formulations are available in Duo-Pak cartridges for
dispensing with a manual or pneumatic 3M EPX Applicator. |
|
Porch Railing - 3M Scotch-Weld
Structural Plastic Adhesive DP-8004 bonds unique thermoplastic composite
in assembly of hollow railings that are stiffer than wood. |
Refrigerant Coil - 3M
Scotch-Weld Epoxy Adhesive 2214 bonds and seals coils with overlap shear
strength of 4500 psi. One part eliminates metering and mixing. |
Retail Store Display Columns - To
maintain the quality wood-like appearance, 3M Scotch-Weld Structural
Plastic Adhesive DP-8005 eliminates screws, nails and related surface
finishing in assembly of plastic composite components. |
Aircraft Entry Steps -
Brush-applied 2-part 3< Scotch-Weld Adhesive 2216 B/A provides a
tough, flexible bond between honeycomb and the framework in entry step
panels of commuter aircraft. |
Bicycle Frame Assembly - 3M
Scotch-Weld Epoxy Adhesive DP-420 bonds steel couplings into aluminum
tubing of the frame. Couplings are threaded for easy assembly and
disassembly. The toughened epoxy bonds for the long run in high stress
areas. |
Bonding Magnets To Steel Rotor -
Bonds made with 2-part 3M Scotch-Weld Epoxy Adhesive DP-460 cure at room
temperature and reach 4500 psi in overlap shear strength. Void-filling
properties secure loose fitting surfaces. |
(Contact Adhesives
& Tapes regarding individual brands not displayed here)
|
HOME | About Us |
Products |
Contact Us | Ask The Expert
Copyright 2001-2013, Adhesives and
Tapes |