YOUR COMPLETE
SOURCE OF
ADHESIVES &
TAPES
|
- Easy To Use
- Fast Setting In Seconds
- Strong Bonding
- Single Component
- Solvent Free
- Bonds Widely Various Materials
- Room Temperature Cure
- Non-Flammable
|
CYANOACRYLATE
ADHESIVE
Bonds: |
|
- ABS
- Acrylic
- Aluminum
- Bakelite
- Butyl Rubber
- Ceramics
- Cellulose Acetate
- Chlorprene
- Copper
|
- EPDM
- Leather
- Natural Rubber
- NBR
- Neoprene
- Nylon
- Paper
- Phenolics
- Plated Metals
|
- Polycarbonate
- Polyester
- Polystyrene
- PVC
- Polyolefins
- SBR
- Stainless Steel
- Polyurethane
- Wood
|
|
SPECIAL
INDUSTRY SERIES
EVOBOND Special Industry Series cyanoacrylate adhesives
(E-Series) are special for industry application, including high
performance surface insensitive and rubber toughness. |
GRADE: |
|
:E01:
Surface insensitive quick setting velocity & medium viscosity (100 cps) bond acidic & porous substrate or under low humidity conditions, including wood/cardboard/ leather/ rubber/woven fabric/PVC. |
E54:
Surface im.,ensitke thi\otiopic gcl (75,000cps) for
plastic/rubbcr/nictal/ wood/ woven fabric, can be applied on vertical & porous surfaces, will not migrate & can be cured better with EVOBOND's accelerator. |
E06:
Surface insensitive ultrafast setting velocity & low viscosity (20 cps) bond acidic substrate or under low humidity conditions, including plastic and rUbber. For PE/PP/Silicone
Rubber / ABS / TPR / EPDM's adhesion, both surfaces should be treated with EVOBOND primer (AP-1) in advance, then apply E06. |
E60:
Low whitening, medium setting velocity & low viscosity (2-3cps). |
E16:
Medium setting Velocity & high viscosity (1 500 cps) for plastic/ rubber~ metal, can be cured better with EVOBOND accelerator (AF- 1). |
E80:
Rubber toughness, black color, medium setting velocity & medium viscosity (300 cps) for high temperature & impact resistance. |
E20:
Quick setting velocity & low viscosity (2-3 cps) for plastic/ rubber / metal. |
E95:
Medium setting velocity & viscosity (50cps) for plastic/rubber/metal. |
HIGH
PERFORMANCE SERIES
EVOBOND High Perforinance Series cyanoacrylate adhesives are instant bonding, single component adhesives, that bond almost all close-fitting smooth surfaces in seconds. It requires no mixing, no heating, no clamping. These adhesives contain no solvent, have low toxicity, mild odor and non-flammable. |
GRADE: |
|
W-20: Fastest setting velocity for wood work/plastic/rubber/metal. |
V-50: Medium setting velocity & viscosity (50 cps) for plastic/rubber/metal. |
W-50:
Quick setting velocity for plastic/ rubber/metal. |
V-100:
Medium setting velocity & viscosity (100 cps) for plastic/rubber/metal. |
W-70: Medium setting velocity for general purpose. Very long shelf life and filling in 2g PE tube for consumer market. |
V-300: Medium setting velocity & viscosity (300 cps) for plastic/rubber/metal. |
K-2:
Low whitening/low blooming and medium setting velocity type. |
V-50AL: Medium setting velocity & viscosity I |
FV-50: Quick setting velocity & viscosity (50 cps) for wood work and porous surfaces. |
HV-15 (50 CPS): for general purpose. Very long shelf life and filling in aluminum tube blister on card, specially for consumer market. Medium setting velocity & high viscosity (1500 cps) for plastic/rubber/ metal, can be cured with EVO BOND accelerator. i |
FV-100: Quick setting velocity & viscosity (100 cps) for wood work and porous surfaces. |
GEL: Thixotropic gel for plastic /rubber/ metal can be applied on vertical & porous surfaces, will not migrate, can be
cured with EVO BOND accelerator. |
FV-300: Quick setting velocity & viscosity (300 cps) for wood work and porous surfaces. |
|
(Contact Adhesives
& Tapes regarding individual brands not displayed here)
|
HOME | About Us |
Products |
Contact Us | Ask The Expert
Copyright 2001-2013, Adhesives and
Tapes |